After the sampling is completed, pick up the elution tube, tear off the coating of the mouth of the elution tube,rapid self test insert the swab after sampling into the sample eluent, rub and draw up and down the drawer 10 times or at least 30 seconds, and at the same time use your hands Squeeze the swab head at least 5 times through the outer wall of the elution tube to ensure that the sample is fully eluted in the elution tube, cover the upper cover of the elution tube, place it upside down above the sample hole of the test card, and gently squeeze to elute Tube.
Four drops are about 80 microliters. If there are few drops, the type may not be applied, and if there are many drops, the drops may flow back on the test paper. Then start timing, and observe the test card after ten minutes to check the test results.
The test result has a T and a C. If there is a line in the place where C is displayed, it is negative. If there is a line in both C and T, it is positive. If there is only T, or two If there is none, it is invalid. "
After the test result is completed, if it is positive, please be sure to report to the local epidemic prevention department. The test result will be invalid after 15 minutes.
like:
Are Rapid Self-Test Antigen Test Results Accurate?
The difference between antigen detection and nucleic acid detection:
What are the advantages of the new crown antigen self-test?